OpenTransport Error

I couldn’t connect to the DGPS-IP server due to an OpenTransport or TCP/IP error. It could be the server is down or a problem in your local network. 

TFW File Incomplete

The .TFW calibration file is incomplete. It doesn’t contain the UTM zone. See how to modify the TFW file at:
   http://www.gpsy.com/faq/maps.html#tfw

Map Imaging Aborted

The map imaging routines aborted; most probably because you cancelled them. Patience, patience, grasshopper.

Map Calibration Solution Not Possible

GPSy cannot determine a map calibration solution from the data points entered. Please try recalibrating the map after verifying the orthography of the data points entered. 

Map Already Calibrated

GPSy has already calculated a mapping solution from the data points entered. Entering additional data points will not affect the current solution.

GPSy Pro Feature

ChartKit BSB charts are a feature of GPSy Pro. Please upgrade to GPSy Pro.

Protocol Not Supported

You selected a protocol option that has not been implemented (yet).

Eagle Protocol Error

No response to query packet. Make sure unit is connected  and is sending NMEA data (See GPS Data Panel).

GPSy not in NMEA-0183 mode

GPSy and your Eagle/Lowrance GPS must both be set to use the NMEA-0183 protocol. Please check both settings and try again.

Internet Config not installed. 

To launch URLs from GPSy, please install Internet Config from <ftp://ftp.share.com/internet-configuration/>

Please switch your Garmin unit to NMEA/NMEA mode if you wish to use other features in GPSy.

Please switch your Garmin unit to GRMN/GRMN host mode.

Garmin Protocol Error

No response to query packet. Make sure unit is connected and in GRMN/GRMN host mode.

Garmin Protocol Error

No acknowledgement messsage received within time-out period. Make sure unit is connected and in GRMN/GRMN host mode.

Data Transfer Error

This operation could not be completed because the serial port is set to <NONE>. Select a new serial port.

File Transfer Warning

GPSy could not parse the file header (because it was missing or damaged). GPSy will try to send the data using the preferenced datum/coordinate system.  

File Transfer Error

The file header doesn't match your requested transfer type.

File Transfer Error

I cannot autodetect the type of data in this file. Please manually specify the transfer data type by selecting Send Waypoint, Track or Route.

File Transfer Error

GPSy could not parse the file header. This may not be a valid GPS data file. Try manually selecting the file type before transferring.

GPSy Link Required

This feature requires the optional GPSyLink. Please purchase or upgrade to GPSy+GPSyLink at http://www.gpsy.com.

Unregistered Program

This feature is disabled until GPSy is registered. Please register GPSy at http://www.gpsy.com

Preference file out of date

Were you using an older copy of GPSy? Initializing new GPSy preferences.